Product Safety

General Information:

The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.

1. Electrical Hazards:

• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.

• Never connect or disconnect the module while the Eurorack system is powered on.

• Wrong polarity can damage your module or system. Make sure the module is connected with the correct polarity.

2. Heat Generation:

• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.

3. Sharp Edges:

• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.

4. Small Parts:

• Contains small parts that could cause a choking hazard. Keep away from children and pets.

5. Compatibility:

• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.

Installation and Use

• Mount securely in a Eurorack case using compatible screws.

•Use only the included or manufacturer-recommended power cable.

•Connect only when the power is off.

• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.

Environmental Safety

• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.

Liability Disclaimer

• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.

Contact Information

Black Noise Modular
14 Rue Montmeroux
21120
Gemeaux
FRANCE
contact@blacknoisemodular.com

Information regarding DIY Kits:

This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation.

Assembly Requirements

• Soldering skills are required to complete the module.

• Ensure a clean, well-lit, and ventilated workspace free of flammable materials during assembly.

• Use appropriate tools and safety equipment, such as eye protection.

Testing

• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.

• Use a multimeter or other appropriate tools to confirm proper functionality.

Responsibility

Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.